Display setting

Share your feedback about final assembling your bike!
Post Reply
User avatar
Max Shojaie
Posts: 69
Joined: Fri Mar 29, 2019 8:19 pm

Display setting

Post by Max Shojaie » Mon May 20, 2019 8:11 am

SW900 (BW display)
Hold the M button for 3 seconds.

For:
250w, 350w, 500w Bafang motors

P1=Display brightness. 1 is the darkest, 3 is the brightest
P2=Unit of the mileage. 0 is KM, 1 is MILE
P3=36
P4=Sleep time. 0 is without sleep, other numbers stand for sleep time (1-60 min).
P5=3/5/9 (PAS grades)
P6=27.5 (Wheel diameter)
P7=69
P8=speed limit. Range: 0-99km/h, 99 means without limit
P9=Zero start & Non-zero Start. 0 is Zero Start, 1 is Non-zero Start
P10=Driving mode. 0 is PAS only. 1 is Throttle only. 2 is PAS & Throttle.
P11=PAS sensitivity. Range: 1-24
P12=PAS start strength. Range: 0-5
P13=12
P14=35

For:
1000w motor

P1=Display brightness. 1 is the darkest, 3 is the brightest
P2=Unit of the mileage. 0 is KM, 1 is MILE
P3=36
P4=Sleep time. 0 is without sleep, other numbers stand for sleep time (1-60 min).
P5=3/5/9 (PAS grades)
P6=27.5 (Wheel diameter)
P7=42
P8=speed limit. Range: 0-99km/h, 99 means without limit
P9=Zero start & Non-zero Start. 0 is Zero Start, 1 is Non-zero Start
P10=Driving mode. 0 is PAS only. 1 is Throttle only. 2 is PAS & Throttle.
P11=PAS sensitivity. Range: 1-24
P12=PAS start strength. Range: 0-5
P13=12
P14=35

Marian
Posts: 24
Joined: Sat Mar 30, 2019 9:20 am

Re: Display setting

Post by Marian » Mon May 20, 2019 3:02 pm

Hi Max,

How about the Color Display?
Are the settings the same?

Post Reply