General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

Update. Received my controller and swapped it out. Did my normal run and didn’t come across my previous problem. Couple tips for any one installing the first time. First tip is when I tried to pull the old controller out it wouldn’t come out. I actually was pulling on the main power cord to it and lifting the bike. What you need to do is first pull the top part of the controller towards the back of the bike. I used a screw driver push it back. Then it popped right out. Second when I installed the new controller and installed the battery and turn it on before I buttoned it up I got nothing. No power. Display not lighting up.  I got my old controller and connected it back up out of the bike and it work. I was like that’s just great. Can’t believe the new one not working. As I was looking it over I noticed that the power cord the has the red and black clips on it where reversed. So when I plugged it in as shipped negative was hooked up to positive. I just pulled back on the clip and they come apart and I was able to hook it up correctly. I worked on the bike upside down. You need to take the long bolt out that holds part of the back frame on and then it will scissor down at the bolt by the rear suspension shock and you will be able to fish the power cord to the motor in and out of the frame. You don’t need to take the whole back section of the bike off. Don’t have to take off chain. Didn’t need to mess with the breaks or gears or anything. Just watch when you pull that bolt out there will be a couple spacers hitting the ground. I used a small L shape Allen wrench on the pedal chain side to get behind the sprocket to hold that bolt then the other side turns out with the another allen wrench. Don't need to take that sprocket off.

Nireeka Revenant 1000

United States

Update. Explained to Nireeka my problems with the PAS in detail. Next thing I know is they sent  me a message saying they sending the part they think I need 2 hours after my message. They said they feel it’s the controller.Excited to swap it out and see what happens. Again I must say. 100% satisfied with this company. This problem is common with all different brands of e-bikes after researching it. Even if it turns out to not be the problem which I feel it is. They trying. All I can ask for. Will let you know how it goes.

If you change the controller you might need to calibrate it. Do you know if the motor is a Uart or canbus?

Sweden

If you change the controller it will probably need to be calibrated. Do you know if the motor is a Uart or canbus system?

This is happening to me also. I Havnt found the problem. Usually what I do if give it some throttle for 20 or so feet and it comes back to life. Has done it on hills. Has done it on flat stretches. I turned the bike off and then turned it on which seemed to help it also. I have check all connections unplugging and plugging back in other than the  bigger connection going to the motor. Guess I’ll try that. Never had it unplugged. I would have to say it’s not the battery being if I add throttle it starts to work. Has done it when the battery is fully charged. Has done it when the battery at 40%. The display doesn’t turn off. So anybody that has found a solution I would appreciate some feed back. Take care of it myself before I contact Nireeka.

Just got my Revenant and I've only been on maybe 5 rides with it so far. But now it seems like the PAS/Torque sensor cuts off power from the motor randomly while I'm pedaling. Any info on how to fix this?

Losing Motor Power

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Beware of this company.  I ordered a Mega back in March and never got it.  They gave me a run around and a fake shipping.  I then asked for a refund, and they bounced the refund so I had to dispute the transaction so my payment would be refunded to me from my bank.  Nireeka did nothing and still has the money.  BEWARE and check out other people's reviews having the same issue.  Nireeka may have been an honest company before, but something has changed if they were.   Now they are just crooks.

Nireeka Mega 1500

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

After nearly 10 months I still don’t have a bike to take a picture of. Who the hell wants to wait that long for anything? Nireeka are arrogant liars. Lost interest long ago in the bike and the company.

United Kingdom

Nireeka Ebike Gallery

getting my bike i paid for is an option i'm missing

Headlights?

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

The hers of the his and her bikes was delivered. I did a full unbox &amp; build with mods on a Twitch Live Stream. I've uploaded the edited version on my youtube channel. https://youtu.be/zaXMi7DymzM

image0.jpeg

Just received mine.  Looks exact to yours.  For the forks, is there a recommended pressure?

ByDonald Castellano·Aug 15·General Discussions

ByHisaaki Kobayashi

ByYounes Shojaie

ByMichael Means