General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

At high toque levels I have notice that the gears in the motor are slipping.  At first I thought it was the de-reailers, but I took it to my local e-bike repair shop who pointed out that is was the internal gears in the motor that were slipping.  Has anyone ...

Perfect. Thank you. So at this point only the speed will be firebrick between those two motors.

Nireeka Collector

United States

Befang 1000 Watt Motor

Folks, after getting over the disappointment of an ill-fitting seat post, I can honestly say that I am really enjoying my gen-3 Nireeka Homie.  For an e-mountain bike with all these features, I find it really easy to load onto my bike carrier.  I have taken it for rides on ...

I ordered it in September 2020.  It arrived in Feburary 2021.  The bore for the seat post was on the small side, so it took me a while to get the seat to go down to a good riding height.  I didn't know back then that carbon is really easy to adjust.  All you need is sand paper.  Now the seat post is wedge in there pretty good.  LOL
I've been riding it since May and have grown to like it quite a bit.  I'm installing a RockShox Monarch RL rear shock this week to improve the ride.  Can't wait to try it out.

Nireeka Homie 

Digging my Homes!

What is the best rack for the nireeka prime bike

This is another brand and has several models up to 75kg and 4 bike

Spain

Bike rack

my battery display will only show 100%,80,60% ETC and not show accurate readings

seems like normal behaviour ... mine does exactly the same ... 

if you want to have a more granular view, change the % to voltage and then you will see the voltage decline ...

Belgium

NIREEKA homie 1000 watt  48 VOLT BATTERY DISPLAY DROPS 20%  increments

Hello,
So I just received delivery of my Prime (pictures soon!).  When I push the bike backwards, the motor makes a clicking noise.  Just wanted to know:
1. Normal?
2. If normal, does it damage the motor by pushing bike backwards? (Yes, I know bikes are supposed to go forward, ...

Canada

Pushing the bike BACKWARDS...Is it harmful to the motor?

is the bike that unreliable because I read a lot of stories here of not delivering, parts not working and such, it is a lot of bad info for somebody like me who likes the appeal of the bike .
is there a second-hand prime bike for sale here? 
it's ...

With regards to a used market for these bikes there aren’t that many out there compared to larger brands.
I’ve seen 2 for sale, 1 homie and 1 prime (due to circumstances). The company is on its 3rd generation now and has some very unique and beautiful bikes.
The majority of the components are higher end off the shelf parts from reputable companies and just about everything but the frame can be purchased locally or online if needed. There have been a few issues but they seem to be easy fixes or replacements. 
The biggest issue is shipping delays due to COVID and supply chain form China, everything’s a mess now.
Like I said before I’m really happy with my bike, I had a couple problems myself like the wrong seat post and pedals sent but I submitted a ticket and they air shipped the parts to me quickly. I also have the derailleur problem but it seems to be a 5$ part to fix it and Nireeka has been very good with responding to my messages and tickets.

Nireeka Prime 

is there a second hand market for these bikes and who is selling their prime

I got my Homie in September 2020 and already the Pedal Assist stopped working in the middle of my ride and now I hear a popping noise coming from the motor. Anybody else had this issue? I have a 1000w motor with a 48v battery. Thank you.

WOW!! I also got mine in September 2020 and thanks God I sold it in $1,700 before it broke on me. Open a ticket and hopefully you will get that resolved. sorry to hear and good luck.

PAS stopped working on Homie

I've watched a couple of video's of the Homie's chain continually coming off. Is this an issue that is still out there or has it been corrected. Also, is it a matter of tightening the derailleur correctly?

the maximum nbr of tooth you can mount is 48 T ... anything bigger will rub the frame

Chain coming off on Homie

I sent a video showing my battery won't charge.  They admitted the old batteries are bad and they were going to replace it with the new ones they just got.  But now they changed their mind and won't be sending me one and said I now need to buy one ...

Hello Joseph,
On the Indiegogo updates, we have explained how to save the battery. 
You have used your bike only 150 miles in almost 9 months and kept the battery is in unused condition. We already have explained all the reasons by replying to your tickets. Thank you.

Battery not charging

Is the Nireeka Prime Battery 48V 17.5 AH proprietary? If not what make and model case does it use?

Answer was provided via a Ticket I opened.

"Nireeka uses its own designed case for the Prime batteries."

Nireeka Prime Battery Proprietary?

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.