General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

Most of the braking comes from the front wheel(s) of a vehicle. On our bikes we should use the front brake mostly.  When you use the rear brake more than the front you'll lose traction and slide the rear wheel unnecessarily.  
I have XT on my Homie and don't see a need for bigger rotors, but if I did it would only be the front.

Nireeka Homie 

United States

Attached you can find the model we're using.

Nireeka Collector

Canada

For the rear brake, one of these adapters is enough? It should bridge from 160mm to 203mm!

Austria

I use the SM-MA-F203 P/P for the front brake - it fits perfectly.
Are you using this same adapter for the rear brake also?

Thanks much, Chris. I will try this shortly and let you know.

Upgrading the Homie to 203mm disks is not trivial, at least what the rear wheel is concerned.
For the front wheel the Shimano adapter SM-MA-F203P/P fits perfectly and the entire exercise is each.
For the rear wheel I have not found a fitting adapter.
I tried the Shimano SM-MA-F203P/PM is not high enough. There is still a gap which needs to be bridged with washers. I did this on my Homie - it works, sits firm - but is sort of a provisory solution.
Does anybody has experience with this?
A hint for a fitting adapter?
I found the PM-PM-F/R203 adapter. Have it on order.
I hope two of them will bridge the gap.
Any hint is most welcome. 
I noticed Nireeka offers an upgrade kit. 
So they must have identified and ship an adapter fitting the purpose.
Thanks!

Brake Upgrade to 203mm disks

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Prime 

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.

ByMarian Wosnitza·Sep 18, 2020·General Discussions

ByHisaaki Kobayashi

ByYounes Shojaie

ByMax Shojaie