General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

I have a bar mount type on my Prime, but have the side mount on others. You can use either on the Prime. There are pros and cons for both. The top mount ones bounce some and the side mount can get knocked off easier if you trail ride. If you go with a top bar mount, check the size of the mount to see if you have room on the bar and that it has rubber shims to add or delete to give you a secure grip on the bar. Most are adjustable.. Either way any mirror is a good upgrade for safety.
Regards

Nireeka Prime 

United States

Hi all,
I am wondering if anyone has tried a left-side mounted mirror? If so, do you have the inside the grip area mount? Or, did you go with the clamp-on type and mount it next to the grip?

I appreciate any experiences with your choice.

Thank you,
Ross

Side Mirror

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.

ByRoss Bergstedt·Oct 12, 2021·Feature Request

ByHisaaki Kobayashi

ByYounes Shojaie

ByMax Shojaie