General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

Your link to the battery article (https://nireeka.com/help-center/topic/32/battery) solved my problem. There was an issue with the connector behind the lower battery bracket inside of the frame. I removed the battery and unscrewed the bolts on the bracket. The cables/connectors behind it had become loose. I tightened them, and the problem was fixed. Thanks!

Canada

Nireeka Prime A4

United States

It's either the battery or some kind of connector-related issue. Have you tried unplugging/plugging the display connector?

I also recommend checking this out: https://nireeka.com/help-center/topic/32/battery

Nireeka Collector

Got the bike on Monday. Assembled it and rode it that night and again when I got home on Tue. In the middle of my Tue night ride, the bike just shut off and will not re-start or re-boot. All the wiring that I can get to checks out fine. The battery meter was at about 50% when it happened. Any suggestions?

Bike is non-responsive less than 24 hours after assembling

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Prime 

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.

ByBrad Bimson·Aug 17, 2022·Prime

ByHisaaki Kobayashi

ByYounes Shojaie

ByMax Shojaie