Jan 30, 2022 04:09 AM
All Contents and Errors
There are two variations of the DP C01.
The error codes are identical in both versions.
Compatibility: Nireeka Homie, Prime and NYX
When any fault occurs to the electric bicycle’s electrical control system, the instrument will automatically indicate an error code, of which the meaning is defined in the following table. The error code indication interface is shown in the following figure:
The DP C01 display can show e-bike faults. When a fault is detected, the icon will be displayed. In the speed field one of the following error codes will be displayed:
Error | Error Definition | Solution |
---|---|---|
03 | Brakes enabled | Check whether a brake cable is stuck |
07 | High voltage protection | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
08 | Fault with motor hall sensor inside | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
10 | The motor temperature reaches the max protection value | Stop the e-bike for a rest |
12 | Fault with the current sensor inside the controller | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
13 | Fault with a temperature sensor inside battery | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
21 | Fault with wheel speed detecting sensor | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
22 | BMS communication fault | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
25 | Torque sensor torque signal fault | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
26 | Torque sensor speed signal fault | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
30 | Communication fault | Bring your Pedelec to your dealer or to a specialist to have the error fixed |
Note:
Error Code 10 will probably appear on the display when the e-bike is climbing for a long time. This indicates that the motor temperature has reached the protection value, in which case the user needs to stop the e-bike for a rest. If the user continues to run the e-bike, the motor will automatically cut off the power.