Jan 30, 2022 04:09 PM
All Contents and Errors
There are two variations of the DP C018.
The error codes are identical in both versions.
Compatibility: Nireeka Homie, Prime and NYX
“Error Code” check:
Briefly press (<0.5S) or select “Error Code” and briefly press (<0.5S) to enter into the interface in which it displays information. “E-CODE” displays the error information for the last ten times.
“E-CODE 1” represents the error content for the last time. “E-CODE 10” represents the error content up to the tenth time. A maximum of ten records can be kept. Error code “00” means no error. Please see the error code table to know about the definition of the other codes.
DP C18 display can show e-bike faults. When a fault is detected, the icon will be displayed. One of the following error codes will be displayed:
Error | Error Definition | Solution |
---|---|---|
07 | High voltage protection | Check the battery voltage |
08 | Fault with motor hall sensor inside | Have your dealer check the motor stator |
10 | The motor temperature reaches the max protection value | Stop riding and wait until the LED stop flickering |
12 | Fault with the current sensor inside the controller | Have your dealer check the controller |
13 | Fault with a temperature sensor inside battery | Check the battery |
21 | Fault with wheel speed detecting sensor | Check the motor stator |
22 | BMS Communication fault | Replace the battery |
30 | Communication fault |
1. Check the connectors between the EB-BUS and the controller 2. Replace the controller |