General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

Ok I changed my setting back to KMH the way I got it. When I hit 56 Kmh. It seemed like it had a little more power. It seemed I got an extra mph out of it. Think 33 mph. I really don’t think I’m giving it enough straight away on the flat being I live in a hilly area. Like I said down a hill I can hit 35. Even a slight down hill grade. If I lift the back of the bike up and give it throttle in PAS 5 it shoots to 37 then backs down to 35 even though the speed is set to 27.1 in the display software. My final thought are yes it goes 35 MPH. It’s an awesome bike. Worth every penny if you compare it to other fiber e-bike. Even carbon fiber mountain bikes that are not electric. Twice as much money. Also I might add that people will say being it’s made in China it’s not a quality bike. In my research I learned that Santa Cruise and Trek carbon fiber frames are made in China. Along with most other carbon frames. A lot of the parts are made in China. Only difference is they ship the parts here. We in the USA assemble it then charge you twice as much. My advice if you are going to be purchasing Nireeka is check the Canada Inventory. I had my bike in 5 days. Also if you are going to be cruising the streets get the hub motor.  I would imagine it would be a pain in the butt changing gears all the time to get to top speed. Haven't taken it on the trails. So I can’t tell you about that. Might buy another one for the wife.

california nireeka site has a few bikes in stock also.

United States

Nireeka Revenant 1000

Had a thought after my last post a hour ago. When I first rode my bike and I hit 35 mph but  it was actually 56 KMH and that converts to 34.8. Then I changed my display to MPH. Maybe in the KMH mode it goes faster thinking you’re in a different country. I’m pretty sure the government mandates a 28 mph speed limit in the USA where other countries don’t. So when I can I’m  going to try that. Change it back to KMH. Maybe try that yourself. Going to rain the next couple days here so It will be a couple days till I can report back on that.

I have the Revenant 1000. The first day I got it I hit 34.8 on a flat. Quickly. But now it seems like I can only hit about 30. Down hills I can hit 35 but then it will hold you back. I checked the speed limit in the display and it’s set at 27.1. So I don’t know what gives. I’m still happy with the bike. It is a beautiful bike. But I’m a little frustrated with support because I sent a ticket in 3 days ago and no one’s got back to me. I will mention that I think you need to be in PAS 5 to get top speed with your bike with throttle. Because when I was in PAS 1 the power was real low. If anybody got a suggestion please post it.

They have so many disappointed customers with broken brand new bikes. I get a response every 5 days if I’m lucky. It’s so frustrating. If the bike worked proper and the service was timely. I would consider buying another or getting a replacement. But they waited almost 2 years to send my bike. I had to file a fraud claim with my bank to get a response. Got to ride the bike 1 time. Here I am 4 months later with still a broken bike. Fighting with customer service. Revenant 1000

The powers just all of a sudden gone from the bike! It works but not for long I can’t take it out as the speed goes to nothing in seconds when I lift the bike and test the throttle the power is weak in comparison to the way it was previously. This happened about two days ago and now  I’m not riding it as I don’t know what the problem is I was thinking that the sensor magnet had gone but it’s still there. Does anyone know what the problem could be as I find the customer service here wanting.

Based on your support ticket, your problem is the speed sensor. You have discounted the sensor somehow and in this case, the top speed would be only half of the claimed one.

Canada

Nireeka Prime 

United Kingdom

I am about to buy a bike, but I do not see that these posts respond, someone could confirm that the maximum speed has been reached on a straight

In the below table, you can find the confirmed top speeds by the owners:

https://nireeka.com/um/nireeka-model-comparison.pdf

Not a Nireeka owner

I was wondering why on full throttle I can only get up to 16.5 miles per hour on a flat surface and not 20 MPH as advertised. In Peddle assist I can get up to 24.5 but not 28 MPH in the PA 5. Otherwise the bike performs fine. Is this average?

Speed

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

What bottom bracket tools did you need for this installation?

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Ebike Gallery

you can order a kit here or buy an adapter cable but for this kind of money should be included. I got mine on.

Nireeka Collector

Headlights?

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

After 7 months of waiting finally I got it. So satisfying. I almost loose hope. Tomorrow I got to try it.

20221024_152313.jpg

Hi, I am interested  in purchasing a prime and wondering where you take your bike for service or any warranty work? Are there any options for service in Winnipeg. Any advise would be greatly appreciated.

ByGeorge Crown·Nov 28, 2020·General Discussions

ByHisaaki Kobayashi

ByYounes Shojaie

ByMichael Means