General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

I have a Prime and an NYX. What size seat post diameter works with these bikes. I believe it is 31.6mmm, but cannot find the information on the site to confirm. Also, what length dropper should I get for either bike. I'm specifically looking to put a dropper in the NYX, but also realize that due to the frame geometry the post will only go so far down in the frame. What do y'all recommend for the dropper length?

AXS DROPPER POST

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Prime 

United States

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.

ByJoe Davis·May 08·Installation Guides

ByHisaaki Kobayashi

ByYounes Shojaie

ByMax Shojaie