General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

you need to fill it up to a level below the one recommended for your weight, then sit on the bike and measure the sag. If too high, you increase pressure a bit, if too low sag ... decrease the pressure ... just let the pump connected to the valve to be able to do this in less then 5 minutes ...

Nireeka Homie 

Belgium

Nireeka Prime 

Taiwan

United States

the default pressure of front fork may be not suitable for everyone.
I got a supper soft one.
And I also want to learn how to adjust SAG for myself, thus I bought a air pump specified for air suspension.

please check this video
https://photos.app.goo.gl/FbogDnuX4EwZdNEm9

however, filled as the suggesting psi, it seems too hard. to SAG it almost has no change.
any comment are welcome.

how to fill air for front suspension

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Dammit. Still leaves a 1mm gap between the bottom bracket frame and the RHS lockring. Maybe spacers are needed on both sides... I dunno.  Buy a motorbike

Not a Nireeka owner

Australia

How do I install the Torque Sensor Package?

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Ebike Gallery

Here is a quick demonstration of the final version of the NSD.

https://youtu.be/jLAH-ll7aBs

Specs:
We're using a touchscreen 6.53 inches smartphone-type display with 720x1600 pixels resolution on the NSD.

Features:
All the promised features are included.

Installation:
The NSD will be replaced with your current Nireeka display. It's plug&amp;play.

Connectivity: ...

So is this just an app for your phone that you can connect via bluetooth to a receiver that plugs in to the current display plug?

Nireeka Revenant IGG Earlybird

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

If you have a Bosch e-bike light kit, keep in mind that turning on the headlight also turns on the backlight at the same time. It uses a single switch to control both lights. 1. Locate the (+) button on one of the handlebars, next to the tiny LCD monitor. 2. To turn on the light, press and hold the (+) button for no more than three seconds.

ByYuteng Lin·Aug 28, 2020·Prime

ByHisaaki Kobayashi

ByYounes Shojaie

ByMax Shojaie